Unisight Digital Technologies TZHEF08 Instrukcja Użytkownika Pobierz pdf (Strona 40)

Digital Video Network Surveillance System

Unisight Digital Technologies, Inc.

Fig 5.9 Input camera number

The steps of camera name setup:

Step 1: Select one camera.

Step 2: Move “Active Frame” to camera name edit box, press[EDIT]key to enter

into edit status, you can input digital number, uppercase and lowercase characters

(refer to Chapter 3.4). The camera name can support 32 characters.

Step 3: Press[ENTER]key to exit edit status.

Move “Active Frame” to “Confirm” button, press[ENTER]to save the

modification and you can see the new camera name. Press “Cancel” button

or[ESC]key to abort.

Camera Name Position

If you do not want to display camera name, just disable the check box beside

camera name edit box. The disable flag is “×”. If you enable the check box, you can

setup the camera name position. You can copy the position to any other camera. The

setup steps are:

Step 1: Enter into “Camera” menu.

Step 2: Select one camera.

Step 3: Enable the check box on the right side of camera name, then you move

“Active Frame” to “Position” button, press[ENTER]to enter into camera name

position setup interface, as picture below in that interface, you can

use[È][Ç][Æ][Å]keys to move camera name position. When the position is fixed,

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 86 87

Brak uwag

Unisight Digital Technologies TZHEF08 Instrukcja Użytkownika Strona 40